AD8227BRMZ Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 200μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 400μA, this op amp ic can operate. 60dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Instrumentation amplifier resistance should stay within the range of 60kOhm.
AD8227BRMZ Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 60kOhm

AD8227BRMZ Applications
There are a lot of Analog Devices Inc.
AD8227BRMZ Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Factory Lead Time	8 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	60kOhm
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Base Part Number	AD8227
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	400μA
Max Supply Current	600μA
Slew Rate	0.8V/μs
Amplifier Type	Instrumentation
Common Mode Rejection Ratio	100 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	2.2V~36V ±1.5V~18V
Output Current per Channel	13mA
Input Offset Voltage (Vos)	200μV
Bandwidth	250 kHz
Gain Bandwidth Product	250 kHz
Neg Supply Voltage-Nom (Vsup)	-15V
Voltage Gain	60dB
Average Bias Current-Max (IIB)	0.027μA
Voltage - Input Offset	100μV
-3db Bandwidth	0.25MHz
Height	950μm
Length	3.2mm
Width	3.2mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead