AD825ARZ-REEL7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 7.2mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 66dB. There are a total of 1 channels available on the op amps. The quiescent current is 7.2mA.
AD825ARZ-REEL7 Features
8 Pins
supply voltage of 5V
66dB voltage gain

AD825ARZ-REEL7 Applications
There are a lot of Analog Devices Inc.
AD825ARZ-REEL7 Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD825
Pin Count	8
Number of Channels	1
Operating Supply Current	7.2mA
Quiescent Current	7.2mA
Slew Rate	140V/μs
Amplifier Type	J-FET
Common Mode Rejection Ratio	80 dB
Current - Input Bias	15pA
Voltage - Supply, Single/Dual (±)	10V~36V ±5V~18V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2mV
Gain Bandwidth Product	26MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	21000 kHz
Voltage Gain	66dB
Average Bias Current-Max (IIB)	0.0006μA
Power Supply Rejection Ratio (PSRR)	88dB
Voltage - Input Offset	1mV
Settling Time	180 ns
-3db Bandwidth	46MHz
Input Capacitance	6pF
Input Voltage Noise Density	12nV/sqrt Hz
Length	4.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead