AD8422ARZ OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Instrumentation-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 300nV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 300μA , this buffer op amp will be able to operate. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
AD8422ARZ Features8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
AD8422ARZ ApplicationsThere are a lot of Analog Devices Inc.
AD8422ARZ Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
Factory Lead Time | 16 Weeks |
Contact Plating | Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Number of Pins | 8 |
Operating Temperature | -40°C~85°C |
Packaging | Tube |
JESD-609 Code | e3 |
Pbfree Code | no |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 15V |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | AD8422 |
Pin Count | 8 |
Output Type | Rail-to-Rail |
Number of Channels | 1 |
Operating Supply Current | 300μA |
Nominal Supply Current | 300μA |
Max Supply Current | 1nA |
Slew Rate | 0.8V/μs |
Amplifier Type | Instrumentation |
Common Mode Rejection Ratio | 94 dB |
Current - Input Bias | 500pA |
Voltage - Supply, Single/Dual (±) | 3.6V~36V ±1.8V~18V |
Output Current per Channel | 20mA |
Input Offset Voltage (Vos) | 300nV |
Bandwidth | 2.2MHz |
Gain Bandwidth Product | 2.2MHz |
Neg Supply Voltage-Nom (Vsup) | -15V |
Average Bias Current-Max (IIB) | 0.002μA |
Voltage - Input Offset | 60μV |
-3db Bandwidth | 2.2MHz |
Voltage Gain-Min | 1 |
Voltage Gain-Nom | 10 |
Non-linearity-Max | 0.002% |
Height | 1.5mm |
Length | 5mm |
Width | 4mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |