AD844ANZ OverviewIn the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Current Feedback-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Op amp rates 50μV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 6.5mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 1dB for the time being. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V. The current is quiescent at 6.5mA.
AD844ANZ Features8 Pins
supply voltage of 15V
1dB voltage gain
AD844ANZ ApplicationsThere are a lot of Analog Devices Inc.
AD844ANZ Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD844 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 1.1W |
| Output Current | 60mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 2000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 60MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 1dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Settling Time | 100 ns |
| Bias Current-Max (IIB) @25C | 0.45μA |
| Input Capacitance | 2pF |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD844ANZ Datasheet
+8613715157867