AD8605ARTZ-REEL7 OverviewOp amp is packaged in SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. Please take in mind that op amp should be run at 5V. Linear amplifier includes 5 pins. Regarding input offset voltage, buffer amplifier rates 300μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 1.2mA. The voltage gain should stay at 120dB. Instrumentation amplifier has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. It is used TAPE AND REEL to pack the op amps. DigiTrim® corresponds to linear amplifier's series. Linear amplifier has a quiescent current of 1.2mA.
AD8605ARTZ-REEL7 Features5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8605ARTZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8605ARTZ-REEL7 Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
Factory Lead Time | 12 Weeks |
Contact Plating | Tin |
Mounting Type | Surface Mount |
Package / Case | SC-74A, SOT-753 |
Surface Mount | YES |
Number of Pins | 5 |
Operating Temperature | -40°C~125°C |
Packaging | Tape & Reel (TR) |
Series | DigiTrim® |
JESD-609 Code | e3 |
Pbfree Code | no |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
ECCN Code | EAR99 |
Packing Method | TAPE AND REEL |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | AD8605 |
Pin Count | 5 |
Output Type | Rail-to-Rail |
Number of Channels | 1 |
Operating Supply Current | 1.2mA |
Quiescent Current | 1.2mA |
Slew Rate | 5V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 100 dB |
Current - Input Bias | 0.2pA |
Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
Output Current per Channel | 80mA |
Input Offset Voltage (Vos) | 300μV |
Bandwidth | 10MHz |
Unity Gain BW-Nom | 10000 kHz |
Voltage Gain | 120dB |
Power Supply Rejection Ratio (PSRR) | 95dB |
Low-Offset | YES |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 6V |
Voltage - Input Offset | 80μV |
Gain | 120 dB |
Settling Time | 1 μs |
Low-Bias | YES |
Max Frequency | 1MHz |
Input Capacitance | 8.8pF |
Input Voltage Noise Density | 8nV/sqrt Hz |
Height | 1.3mm |
Length | 3mm |
Width | 1.7mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |