AD8614ARTZ-REEL7 OverviewIt is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 2.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -20°C~85°C. A supply current of 1.1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 103.52dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The quiescent current is 1.1mA.
AD8614ARTZ-REEL7 Features5 Pins
supply voltage of 18V
103.52dB voltage gain
Output Type: Rail-to-Rail
AD8614ARTZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8614ARTZ-REEL7 Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -20°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8614 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 7.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 5V~18V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 1mV |
| Settling Time | 3 μs |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| Lead Free | Contains Lead |
AD8614ARTZ-REEL7 Datasheet
+8613715157867