ADA4004-2ARMZ-R7 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 125μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 4.4mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 112.04dB for the time being. On the buffer amps, there are 2 channels that can be used. The linear amplifier is packaged by using a TAPE AND REEL axis. In this case, iPolar® represents the instrumentation amplifiers' series number. The current is quiescent at 2.2mA.
ADA4004-2ARMZ-R7 Features
8 Pins
supply voltage of 5V
112.04dB voltage gain

ADA4004-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc.
ADA4004-2ARMZ-R7 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Factory Lead Time	12 Weeks
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	iPolar®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADA4004
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	+-5/+-15V
Number of Channels	2
Operating Supply Current	4.4mA
Quiescent Current	2.2mA
Slew Rate	2.7V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	113 dB
Current - Input Bias	40nA
Voltage - Supply, Single/Dual (±)	10V~36V ±5V~18V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	125μV
Bandwidth	12MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	12000 kHz
Voltage Gain	112.04dB
Average Bias Current-Max (IIB)	0.165μA
Power Supply Rejection Ratio (PSRR)	118dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	40μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.09μA
Programmable Power	NO
Length	3mm
Height Seated (Max)	1.1mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead