ADA4851-4YRUZ-RL7 OverviewPackaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 3.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 12.8mA, this op amp ic can operate. 107dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Currently, linear amplifier is operating with a quiescent current of 3.2mA.
ADA4851-4YRUZ-RL7 Features14 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-4YRUZ-RL7 ApplicationsThere are a lot of Analog Devices Inc.
ADA4851-4YRUZ-RL7 Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4851 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 12.8mA |
| Nominal Supply Current | 12.8mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 5mm |
| Height Seated (Max) | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-4YRUZ-RL7 Datasheet
+8613715157867