ADA4899-1YRDZ OverviewPackaged in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 230μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 16.2mA, this op amp ic can operate. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. Currently, linear amplifier is operating with a quiescent current of 14.7mA.
ADA4899-1YRDZ Features8 Pins
supply voltage of 5V
80dB voltage gain
ADA4899-1YRDZ ApplicationsThere are a lot of Analog Devices Inc.
ADA4899-1YRDZ Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | ADA4899 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 16.2mA |
| Nominal Supply Current | 16.2mA |
| Output Current | 30mA |
| Quiescent Current | 14.7mA |
| Slew Rate | 310V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 200mA |
| Input Offset Voltage (Vos) | 230μV |
| Bandwidth | 600MHz |
| Gain Bandwidth Product | 280MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | YES |
| Voltage - Input Offset | 35μV |
| Gain | 1 dB |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 600MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 4.4pF |
| Input Offset Current-Max (IIO) | 0.7μA |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4899-1YRDZ Datasheet
+8613715157867