ADA4940-2ACPZ-R7 OverviewIn order to protect the op amps, a 24-WFQFN Exposed Pad, CSP case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 24. It consists of a total of 24 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 24 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 60μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.25mA and 10 . Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 5V. There is an 1.25mA quiescent current in linear amplifier. It is important to keep the resistance within the 50MOhm range of the op amps.
ADA4940-2ACPZ-R7 Features24 Pins
supply voltage of 5V
Resistance of 50MOhm
ADA4940-2ACPZ-R7 ApplicationsThere are a lot of Analog Devices Inc.
ADA4940-2ACPZ-R7 Instrumentational OP Amps applications.
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 50MOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4940 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Test Frequency | 50kHz |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1.25mA |
| Max Supply Current | 1.33mA |
| Quiescent Current | 1.25mA |
| Slew Rate | 95V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 1.1μA |
| Voltage - Supply, Single/Dual (±) | 3V~7V |
| Output Current per Channel | 46mA |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 260MHz |
| Gain Bandwidth Product | 260MHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Supply Voltage Limit-Max | 8V |
| Settling Time | 34 ns |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4940-2ACPZ-R7 Datasheet
+8613715157867