ADBF609WCBCZ502 Overview
An electronic component available in package 349-LFBGA, CSPBGA.Tray packaging is provided for it.Its Dual Core status makes it ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of -40°C~105°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 1.8V 3.3V.There are several digital signal processors in the Automotive series, including this one.There are 349 pins in its configuration.To operate at 500MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.Lower than 105°C should be the operating temperature.There should be a temperature difference over -40°C during operation.As a rule, the frequency should not exceed 533MHz in order to ensure reliability.
ADBF609WCBCZ502 Features
Supplied in the 349-LFBGA, CSPBGA package

ADBF609WCBCZ502 Applications
There are a lot of Analog Devices Inc.
ADBF609WCBCZ502 DSP applications.

Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
Image compression
Signal processing for telecommunications
Control systems
Biomedical engineering

Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	349-LFBGA, CSPBGA
Number of Pins	349
Supplier Device Package	349-CSPBGA (19x19)
Operating Temperature	-40°C~105°C TA
Packaging	Tray
Series	Automotive
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Type	Dual Core
Max Operating Temperature	105°C
Min Operating Temperature	-40°C
Frequency	500MHz
Interface	CAN, EBI/EMI, Ethernet, I2C, SPI, SPORT, UART/USART, USB OTG
Data Bus Width	40b
Max Frequency	533MHz
Voltage - I/O	1.8V 3.3V
Non-Volatile Memory	ROM (64kB)
Voltage - Core	1.25V
On Chip Data RAM	808K x 8
Clock Rate	500MHz
RoHS Status	ROHS3 Compliant