ADF4001BRUZ-RL Overview
Clock ICs are packaged using the Tape & Reel (TR) method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. There are a total of 16 terminations in this file. A voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS, TTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 200MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 2.7V~5.5V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock Generator (RF). An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electrical components for the base part number ADF4001 can be found below. A 16 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 5V. The output frequency is magnified as high as possible with 2 signal outputs. Time clock generator requires a supply current of 4.5mA to fully function.
ADF4001BRUZ-RL Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

ADF4001BRUZ-RL Applications
There are a lot of Analog Devices Inc.
ADF4001BRUZ-RL Clock Generators applications.

Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel

Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Type	Clock Generator (RF)
Terminal Finish	Matte Tin (Sn)
Voltage - Supply	2.7V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	ADF4001
Output	Clock
Pin Count	16
Number of Outputs	2
Operating Supply Voltage	5V
Number of Circuits	1
Operating Supply Current	4.5mA
Nominal Supply Current	4.5mA
Frequency (Max)	200MHz
Data Rate	200 kbps
Input	CMOS, TTL
Ratio - Input:Output	2:1
Primary Clock/Crystal Frequency-Nom	100MHz
PLL	Yes
Differential - Input:Output	Yes/No
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead