ADF4156BRUZ-RL7 OverviewIn order to package it as a clock IC, the Tape & Reel (TR) package is used. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 16 terminations. Clock generator ics require a voltage of 3V. As the Clock PLL's input, CMOS, TTL is designed to be used in order to generate the clock signal. It provides a maximum frequency of 6.2GHz. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 3.3V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. Clock generator ic works with 2.7V~3.3V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. Clock logic levels are supported by this RF synthesizer. Fractional N Synthesizer (RF) is the type of electrical part that this component is classified as. It is a 16-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number ADF4156. The clock PLL has 16 pins that are available. In terms of the supply voltage, PLL clock can handle 5V volts. The frequency synthesizer features 1 signal outputs to ensure as high a frequency as possible. For the clock time generator to function properly, 26mA of supply current must be provided. For this analog clock generator, a maximum supply current of 32mA should be avoided.
ADF4156BRUZ-RL7 FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4156BRUZ-RL7 ApplicationsThere are a lot of Analog Devices Inc.
ADF4156BRUZ-RL7 Clock Generators applications.
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
Test equipment
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Fractional N Synthesizer (RF) |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4156 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 26mA |
| Nominal Supply Current | 26mA |
| Frequency (Max) | 6.2GHz |
| Supply Current-Max (Isup) | 32mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4156BRUZ-RL7 Datasheet
+8613715157867