Add to cart |
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 32-LQFP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.5V.The A/D converter has 12 channels.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -50°C~125°C.The number of samples of audio recorded every second is 4k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 32 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.It belongs to ADS124S08 family.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.12 inputs are employed.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 5.2V.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -0.5V.PGA can be ensured when operating.The supply voltage (Vsup) should be kept above 2.7V for normal operation.
1 Functions
32 basic kinds of terminations
There are a lot of Texas Instruments ADS124S08IPBS ADC applications.
Digital Multimeters, PLC's (Programming Logic Controllers)
Microcontrollers.
Music reproduction technology
Instrumentation and test equipment
Digital Storage Oscilloscope
GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
4-channel data acquisition
Music recording
Scientific instruments.
Cell Phones
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -50°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | PGA |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | ADS124S08 |
| Supply Voltage-Min (Vsup) | 2.7V |
| Configuration | MUX-PGA-ADC |
| Number of Bits | 24 |
| Input Type | Single Ended |
| Architecture | Sigma-Delta |
| Number of Inputs | 12 |
| Converter Type | ADC, DELTA-SIGMA |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Sampling Rate | 0.004 MHz |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 12 |
| Sampling Rate (Per Second) | 4k |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Number of A/D Converters | 1 |
| Ratio - S/H:ADC | 0:1 |
| Analog Input Voltage-Max | 5.2V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -2.5V |
| Analog Input Voltage-Min | -0.5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
+8613715157867