ADS1298CZXGR OverviewIt is packaged in a way that resembles 64-LFBGA.The electronic part in this example has been designed using 24 Bits.As part of Tape & Reel (TR), it is embedded.It involves terminating a transmission line with an impedance-matching device.A power supply/analog voltage of 2.7V~5.5V is produced by this electrical device, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) for driving a load.It is important to note that the supply/digital voltage of this electrical device is 1.65V~3.6V.The related parts of a base part number can be found by referring to the number of that base part.Supply voltage should be set to 3V.64 pins are used in the design.A minimum operating temperature of -40°C ensures its reliability.Ensure its reliability by operating at a maximum of 85°C.This device is equipped with 64 pins.As a result, it supports the maximum supply voltage of 5.25V.In order to operate it, a maximum voltage of 1.65V must be applied.Maintaining a high supply voltage of 3V is essential for high efficiency.Approximately 14.1mW Watts are consumed by this electrical device.In order to operate this DC switching regulator, the supply current must be in the range of 3.1mA.This electrical device is a General Purpose type.Inputs are taken from 8 axis.The maximum power supply voltage (DC) of 3.6V is used.There is also IT ALSO REQUIRES DIGITAL SUPPLY OF 1.65V TO 3.6V associated with it.During operation, it operates with the minimal supply voltage (DC) of 1.65V.
ADS1298CZXGR FeaturesADS1298CZXGR ApplicationsThere are a lot of Texas Instruments
ADS1298CZXGR AFE applications.
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Package / Case | 64-LFBGA |
| Surface Mount | YES |
| Number of Pins | 64 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 14.1mW |
| Additional Feature | IT ALSO REQUIRES DIGITAL SUPPLY OF 1.65V TO 3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | ADS1298 |
| Pin Count | 64 |
| Operating Supply Voltage | 3V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 8 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.1mA |
| Number of Bits | 24 |
| Number of Inputs | 8 |
| Resolution | 3 B |
| Sampling Rate | 32 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 1.65V~3.6V |
| Power Consumption | 6mW |
| Signal to Noise Ratio (SNR) | 112 dB |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 1.65V |
| Height | 1.45mm |
| Length | 8mm |
| Width | 8mm |
| Thickness | 1.01mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS1298CZXGR Datasheet
+8613715157867