ADSP-21478BBCZ-2A OverviewIt is a type of electronic component available in package 196-LFBGA, CSPBGA.There is a packaging method of Tray provided with it.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.Surface Mount is mounted in a manner that allows it to be moved.The operation of the device at the temperature of -40°C~85°C TA ensures the normal operation of the device.The digital voltage range of 3.30V refers to the voltage that can be input or output.The SHARC® series contains this digital signal processor.Its uses have 196 terminations.The voltage supplied by 1.2V is used to operate it.Pins are available for 196 components.In its configuration, 196 pins can be found.Many related parts can be identified by using the ADSP-21478 part number as a base.266MHz is a frequency at which the device operates according to a specific design.1.14V is the minimum voltage that can be supplied to this device.This device can be powered by 1.26V voltages.The device operates on a voltage of 1.2V as its supply voltage.Its memory is capable of storing 512kB data.It is possible to configure the data format and transfer speed of 1 UART channels for synchronous serial communication.Timer/counters for measuring and counting external events are called 2 timers or counters.A SHARC-architecture processor core is used here.In order to access the internal properties of the device, there are 16 GPIO acting as interfaces.
ADSP-21478BBCZ-2A FeaturesSupplied in the 196-LFBGA, CSPBGA package
Operating supply voltage of 1.2V
2 timers/counters
ADSP-21478BBCZ-2A ApplicationsThere are a lot of Analog Devices Inc.
ADSP-21478BBCZ-2A DSP applications.
Seismology
Audio
Sonar
Voice recognition
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
| Lifecycle Status | CONTACT ADI (Last Updated: 1 month ago) |
| Factory Lead Time | 16 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 196 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-21478 |
| Pin Count | 196 |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 384kB |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21478BBCZ-2A Datasheet
+8613715157867