ADSP-BF518BBCZ-4 OverviewIn electronic terms, it is a type of component that comes in the package of type 168-LFBGA, CSPBGA .Tray is the packaging method provided.Due to its Fixed Point membership, it is ideal for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.As long as it is operated at the temperature of -40°C~85°C TA, it will operate normally.1.8V 2.5V 3.3V refers to the range of analog voltages that can be input or output.The Blackfin® series includes this digital signal processor.168 terminations are available for its use.1.4V is the supply voltage.168 component pins are present.Its configuration includes 168 pins.With its base part number of ADSP-BF518, many related parts can be identified.The device is specifically designed to operate at the frequency of 400MHz.This device requires a minimum voltage of 1.164V.This device can handle a maximum voltage of 7.1V.This device is powered by 3.3V's supply voltage.116kB data can be stored in the memory of this device.Time and external events are measured and counted with 8 timers/counters.Blackfin-architecture is used in this processor core.There are 40 I/Os on the device.OTP is the type of memory it uses.For short-distance communication, 2 SPI channels are used.3 PWM channels are designed to control analog circuits with digital signals.Different types of network cables can be communicated via 1 Ethernet channels.
ADSP-BF518BBCZ-4 FeaturesSupplied in the 168-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
8 timers/counters
40 I/Os
ADSP-BF518BBCZ-4 ApplicationsThere are a lot of Analog Devices Inc.
ADSP-BF518BBCZ-4 DSP applications.
Speech processing
Radar
Seismology
Audio
Sonar
Voice recognition
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 168-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 168 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 168 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF518 |
| Pin Count | 168 |
| Operating Supply Voltage | 3.3V |
| Interface | Ethernet, I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Memory Type | OTP |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 8 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of PWM Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Number of SPI Channels | 2 |
| Number of Ethernet Channels | 1 |
| Height | 1.12mm |
| Length | 12.1mm |
| Width | 12.1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF518BBCZ-4 Datasheet
+8613715157867