ADSP-BF522KBCZ-3C2 OverviewAn electronic component available in package 289-LFBGA, CSPBGA.Tray packaging is provided for it.Its Fixed Point status makes it ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 1.8V 2.5V 3.3V.There are several digital signal processors in the Blackfin® series, including this one.In terms of its uses, it has 289 terminations.3.3V provides the supply voltage for it.The 289 component has pins.There are 289 pins in its configuration.The base part number ADSP-BF522 can be used to identify many associated parts.To operate at 400MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.In this device, the minimum voltage is 1.8V.It can be supplied with a maximum voltage of 3.6V.A supply voltage of 3.3V is required for its operation.Its memory can be used to store 132kB data.There is a possibility to configure data formats and transmission speeds for 2 UART channels configured for asynchronous serial communication.Timers and counters that measure time and count external events are also called 9 timers and counters.An architecture of Blackfin is adopted by this processor core.48 I/Os are included with the device.
ADSP-BF522KBCZ-3C2 FeaturesSupplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF522KBCZ-3C2 ApplicationsThere are a lot of Analog Devices Inc.
ADSP-BF522KBCZ-3C2 DSP applications.
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
Image compression
Signal processing for telecommunications
Control systems
Biomedical engineering
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF522 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 300 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.30V |
| Clock Rate | 300MHz |
| Height Seated (Max) | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF522KBCZ-3C2 Datasheet
+8613715157867