ADSP-BF542BBCZ-5A OverviewBasically, it is a type of electronic component that is available in a 400-LFBGA, CSPBGA package.A packaging way of Tray is provided.Fixed Point's wide range of applications makes it ideal for a wide variety of applications.Surface Mount is the direction in which it is mounted.It is important that the device is operated at a temperature of -40°C~85°C TA in order to ensure its normal functioning.As the name implies, the analog voltage range of 2.50V 3.30V refers to the voltage that can be inserted or removed.This digital signal processor is part of the Blackfin® series.For its use, it has 400 terminations.The supply voltage is 1.25V.Pins are present on the 400 component.In its configuration, there are 400 pins.There are a number of related parts that can be identified using the base part number ADSP-BF542.In order for the device to operate at 600MHz frequency, there is a specific design.The mounting method is Surface Mount.This device can be powered by voltages as low as 900mV.3.6V is the maximum voltage that can be supplied to this device.In its memory, this device can store 196kB data.Data formats and transmission speeds are configurable for 3 UART channels used for asynchronous serial communication.Counting external events and measuring time are done by 11 timers/counters.It is based on the Blackfin architecture.152 I/Os are available on the device.As far as memory type is concerned, it uses FLASH.2 SPI channels are used for short-range communication in this embedded system.
ADSP-BF542BBCZ-5A FeaturesSupplied in the 400-LFBGA, CSPBGA package
11 timers/counters
152 I/Os
ADSP-BF542BBCZ-5A ApplicationsThere are a lot of Analog Devices Inc.
ADSP-BF542BBCZ-5A DSP applications.
Radar
Seismology
Audio
Sonar
Voice recognition
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| Type | Fixed Point |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF542 |
| Pin Count | 400 |
| Qualification Status | Not Qualified |
| Interface | CAN, SPI, SSP, TWI, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 196kB |
| Number of I/O | 152 |
| RAM Size | 64kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 11 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 132kB |
| Number of SPI Channels | 2 |
| Clock Rate | 533MHz |
| Height | 1.36mm |
| Length | 17.2mm |
| Width | 17.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF542BBCZ-5A Datasheet
+8613715157867