AM1806BZWT4 Overview
The microprocessor is convenient for international shipping since it is packaged in 361-LFBGA. The packaging method Tray provides high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. The operating temperature around 0°C~90°C TJ should be understood. This is part of the Sitara™ series. The CPU is powered by a ARM926EJ-S core. There are LPDDR, DDR2 RAM controllers on this CPU. This microprocessor features I2C, McASP, McBSP, SPI, MMC/SD, UART interfaces to better serve its users. The CPU runs I/O at 1.8V 3.3V. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. Using AM1806 will help you find variants of the cpu microprocessor. To date, there have been 361 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1.3V. An architecture based on 32 bits is used. 456MHz is the CPU's frequency. Datasheets for 361 pin functions can be found here. To transfer data, there is a bandwidth of 32b. A total of 361 pins are injected into the CPU microprocessor's body. This CPU is widely used in a variety of applications with its Surface Mount mounting. It is possible to use the micro processor from 1.3V. Currently, the CPU core voltage is 1.35V. It is designed with 0 RAM (Random-Access Memory). A voltage greater than 1.35V should not normally be applied to the embedded microprocessor. It is recommended to feed the CPU microprocessor with a voltage of 1.25V. A total of 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are available on this embedded microprocessor
AM1806BZWT4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM

AM1806BZWT4 Applications
There are a lot of Texas Instruments
AM1806BZWT4 Microprocessor applications.

Equipment control
Instrument control
Consumer electronics products
Toys
Robots
Radio
Television
Heater/Fan
Calculator
Kindle

Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Package / Case	361-LFBGA
Number of Pins	361
Operating Temperature	0°C~90°C TJ
Packaging	Tray
Series	Sitara™
JESD-609 Code	e1
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	361
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.3V
Terminal Pitch	0.8mm
Frequency	456MHz
Base Part Number	AM1806
Pin Count	361
Operating Supply Voltage	1.3V
Voltage	1.35V
Interface	I2C, SPI, UART, USB
Max Supply Voltage	1.35V
Min Supply Voltage	1.25V
RAM Size	8kB
uPs/uCs/Peripheral ICs Type	MICROPROCESSOR, RISC
Core Processor	ARM926EJ-S
Bit Size	32
Data Bus Width	32b
Address Bus Width	23
Core Architecture	ARM
Boundary Scan	YES
Low Power Mode	YES
Format	FIXED POINT
Integrated Cache	YES
Voltage - I/O	1.8V 3.3V
Number of UART Channels	3
Number of Cores/Bus Width	1 Core 32-Bit
Graphics Acceleration	No
RAM Controllers	LPDDR, DDR2
USB	USB 2.0 + PHY (1)
Additional Interfaces	I2C, McASP, McBSP, SPI, MMC/SD, UART
Co-Processors/DSP	System Control; CP15
Display & Interface Controllers	LCD
Length	16mm
Height Seated (Max)	1.4mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead