AM1806BZWTD4 Overview
The microprocessor is conveniently packaged in 361-LFBGA, making it easy to ship internationally. High reliability is provided by the advanced packaging method Tray. There are 1 Core 32-Bit cores/bus width on the CPU. Understand the operating temperature around -40°C~90°C TJ. The Sitara™ series contains it. A ARM926EJ-S processor powers this CPU. LPDDR, DDR2 RAM controllers are used by this CPU. This microprocessor has I2C, McASP, McBSP, SPI, MMC/SD, UART interfaces to serve you better. I/O is run at 1.8V 3.3V on this CPU. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with AM1806. Total terminations are 361. In the case of a 1.3V voltage supply, the embedded microprocessor should be turned on and run. A 32-Bit architecture is used. CPUs operate at 456MHz Hz. For functions of 361 pins, please refer to the datasheets. Data can be transferred over 32b bandwidths. The CPU microprocessor body is injected with 361 pins. Many applications use this CPU with Surface Mount mounted. From 1.3V, the micro processor can be used. There is 1.35V voltage at the CPU core. RAM (Random Access Memory) is designed to be 8kB. The embedded microprocessor should not be supplied with a voltage higher than 1.35V. 1.25V should be the lowest voltage fed to the CPU microprocessor. It is possible to tell how busy the CPU is by using 4 counters. There are 3 UART (Universal Asynchro3us Receiver/Transmitter) channels on this embedded microprocessor
AM1806BZWTD4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM

AM1806BZWTD4 Applications
There are a lot of Texas Instruments
AM1806BZWTD4 Microprocessor applications.

Automatic control
Equipment control
Instrument control
Consumer electronics products
Toys
Robots
Radio
Television
Heater/Fan
Calculator

Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Package / Case	361-LFBGA
Number of Pins	361
Operating Temperature	-40°C~90°C TJ
Packaging	Tray
Series	Sitara™
JESD-609 Code	e1
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	361
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.3V
Terminal Pitch	0.8mm
Frequency	456MHz
Base Part Number	AM1806
Pin Count	361
Operating Supply Voltage	1.3V
Voltage	1.35V
Interface	I2C, PWM, SPI, UART, USB
Max Supply Voltage	1.35V
Min Supply Voltage	1.25V
RAM Size	8kB
uPs/uCs/Peripheral ICs Type	MICROPROCESSOR, RISC
Core Processor	ARM926EJ-S
Bit Size	32
Data Bus Width	32b
Number of Timers/Counters	4
Address Bus Width	23
Core Architecture	ARM
Boundary Scan	YES
Low Power Mode	YES
Format	FIXED POINT
Integrated Cache	YES
Voltage - I/O	1.8V 3.3V
Number of UART Channels	3
Number of Cores/Bus Width	1 Core 32-Bit
Graphics Acceleration	No
RAM Controllers	LPDDR, DDR2
USB	USB 2.0 + PHY (1)
Additional Interfaces	I2C, McASP, McBSP, SPI, MMC/SD, UART
Co-Processors/DSP	System Control; CP15
Display & Interface Controllers	LCD
Length	16mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead