AMC1200BDUB OverviewOp amp is packaged in 8-SMD, Gull Wing case. Op amps are Isolation types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 200μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~105°C. Operational amplifier can operate supply current at 5.4mA. On the output type, there are Differential different types of op amps. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage.
AMC1200BDUB Features8 Pins
supply voltage of 5V
Output Type: Differential
AMC1200BDUB ApplicationsThere are a lot of Texas Instruments
AMC1200BDUB Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 44mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AMC1200 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Operating Supply Current | 5.4mA |
| Nominal Supply Current | 5.4mA |
| Power Dissipation | 44mW |
| Output Current | 20mA |
| Min Input Voltage | 2.7V |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 95 dB |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 100 kHz |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Supply Voltage Limit-Max | 6V |
| Power Consumption | 82.5mW |
| -3db Bandwidth | 0.1MHz |
| Dual Supply Voltage | 5V |
| Non-linearity-Max | 0.075% |
| Height | 4.85mm |
| Length | 9.5mm |
| Width | 6.57mm |
| Thickness | 3.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867