AMC1200SDUB OverviewPackaging for the buffer amplifier is in the form of a 8-SMD, Gull Wing case. A Isolation-type buffer amplifier is shown here. There is a Bulk case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using a supply current of 5.4mA , this buffer op amp will be able to operate. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential signals. The operating supply voltage of the buffer op amp is rated at 5.5V. A TUBE-shaped amplifier is used to pack the buffer amps.
AMC1200SDUB Features8 Pins
supply voltage of 5V
Output Type: Differential
AMC1200SDUB ApplicationsThere are a lot of Texas Instruments
AMC1200SDUB Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Bulk |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TUBE |
| Max Power Dissipation | 44mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AMC1200 |
| Pin Count | 8 |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.4mA |
| Nominal Supply Current | 5.4mA |
| Power Dissipation | 44mW |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 95 dB |
| Max Input Voltage | 320mV |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 100 kHz |
| Gain Bandwidth Product | 100 kHz |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Power Consumption | 82.5mW |
| -3db Bandwidth | 100MHz |
| Dual Supply Voltage | 5V |
| Max Supply Voltage (DC) | 5.5V |
| Isolation Voltage | 4kV |
| Min Supply Voltage (DC) | 2.7V |
| Non-linearity-Max | 0.075% |
| Height | 4.85mm |
| Length | 9.5mm |
| Width | 6.57mm |
| Thickness | 3.3mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867