AP4310AMTR-G1 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~105°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 200μA . 100dB should be the voltage gain. A linear amplifier like this has 2 circuits on it. Op amp ic has 2 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 105°C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. We recommend that you use this electronic part with an 200μA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 3V.
AP4310AMTR-G1 Features
100dB voltage gain

AP4310AMTR-G1 Applications
There are a lot of Diodes Incorporated
AP4310AMTR-G1 Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

Factory Lead Time	23 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SOIC
Operating Temperature	-40°C~105°C
Packaging	Tape & Reel (TR)
Published	2002
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Max Operating Temperature	105°C
Min Operating Temperature	-40°C
Max Power Dissipation	500mW
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	3V
Operating Supply Current	200μA
Power Dissipation	500mW
Current - Supply	200μA
Slew Rate	0.5V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	3V~36V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	500μV
Gain Bandwidth Product	1MHz
Voltage Gain	100dB
Power Supply Rejection Ratio (PSRR)	70dB
Voltage - Input Offset	500μV
Current - Output / Channel	40mA
Radiation Hardening	No
RoHS Status	ROHS3 Compliant