APDS-9702-020 OverviewThere is a package that contains materials from Tape & Reel (TR).Sensor and detector interface is used to save space by using the 8-UFDFN Exposed Pad package.The characteristics of Optical enable it to provide superior performance.Its mounting technique is Surface Mount.Sensor and detector interface is recommended that the operating temperature be maintained at -40°C~85°C in order to avoid unnecessary cooling processes.The input type adopted by the program is Serial.8 terminations prevent signals from reflecting off the transmission line's end.Using its base part number APDS-9702 you can locate related electronic parts.This device is configured with 1 functions.The voltage supply is 3V.This is a 8-pin type electronic device.Surface Mount is mounted in the way.By maintaining the operating supply current at 70μA, more efficiency can be achieved.Whenever the supply voltage exceeds 3.6V, failures are likely to occur.A failure will occur if the supply voltage is below 2.4V.The system has been optimized to operate at the power supply of 2.5/3.3V.
APDS-9702-020 FeaturesWith 3V channels
operate temperature at the range of 70μA
APDS-9702-020 ApplicationsThere are a lot of Broadcom Limited
APDS-9702-020 applications of sensor and detector interfaces.
Vehicle Speed VRS Interfaces
Automatic Lighting (Residential and Commercial)
Automation of Doors
Motion Triggered Events (Animal photography)
Position sensor
Level transmitter
Proximity sensor
Wearable Fitness
Hearables
Wearable Medical
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Optical |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APDS-9702 |
| Power Supplies | 2.5/3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 70μA |
| Output Configuration | Analog |
| Input Type | Serial |
| Max Output Voltage | 300mV |
| Sensing Distance | 200 mm |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
APDS-9702-020 Datasheet
+8613715157867