BD3484FS-E2 Overview
With the book, you will also receive a case study. In terms of mounting type, the recommended type is Surface Mount. In this case, it is embedded in the SOT-23-6 case. This device has a 4 channel configuration. The chip has 32 terminations. If you search for the BD3484 family of parts, you will be able to find similar parts. On the chip, there are 32 pins that can be accessed. Sorting by TONE CONTROL CIRCUIT can be done based on what type of consumer IC the part contains. Vsup (supply voltage) should not be less than 7V when using this part. It can produce voltage at a voltage level of 8.5V volts. In this case, Vsup reaches its maximal value at 9.5V. Surface Mount is the one who mounts it. This item has 3 bands. Using it when the temperature is below 150°C is recommended. There is no operation below -55°C operating temperature on the chip. 32 pins are available on the chip. Taking into account the operation requirements, the maximum output current of the device reaches 250mA.
BD3484FS-E2 Features
With SOT-23-6 channels
consumer IC type: TONE CONTROL CIRCUIT

BD3484FS-E2 Applications
There are a lot of ROHM Semiconductor
BD3484FS-E2 Audio Special Purpose applications.

Recording Systems
High-End Audio/Sound Card for PC
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles
Distribution Amplifiers
Graphic and P arametric Equalizers
Dynamic Range Processors
Digital Effects Processors

Factory Lead Time	8 Weeks
Contact Plating	Copper, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	32
Packaging	Tape & Reel (TR)
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	32
ECCN Code	EAR99
Max Operating Temperature	150°C
Min Operating Temperature	-55°C
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Terminal Pitch	0.8mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	BD3484
Pin Count	32
Number of Outputs	2
Qualification Status	Not Qualified
Max Output Current	250mA
Supply Voltage-Max (Vsup)	9.5V
Power Supplies	8.5V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	7V
Number of Channels	4
Interface	On/Off
Consumer IC Type	TONE CONTROL CIRCUIT
Number of Bands	3
Length	13.6mm
Height Seated (Max)	1.9mm
Width	5.4mm
RoHS Status	ROHS3 Compliant