CAT5114ZI-50-G OverviewThe file is contained in MSOP packages.The pentometer is stored from Non-Volatile.There are 32 positions in pentometer.This termination is designed for 8.In this programmable potentiometer, you will find 1 functions.As shown, the total resistance of the speed potentiometers will be 50000Ohm.In order for it to perform, it relies on 3V.The digi devices has 8 pins.It is possible to limit the flow with 50kOhm.The potentiameter has 8 pins.A converter of this type can be categorized as DIGITAL POTENTIOMETER.When the potentiometer is supplied with 5V voltage, it conducts.As long as 85°C is set, the digital resistor will run steadily.A minimum working temperature of -40°C is necessary for reliability.Voltages up to 6V can be supplied to it.2.5V is the minimum supply voltage that it can work with.
CAT5114ZI-50-G FeaturesAvailable in MSOP package
8 pins
Operate supply voltage at the range of 5V
CAT5114ZI-50-G ApplicationsThere are a lot of ON Semiconductor
CAT5114ZI-50-G Digital Potentiometers applications.
Household appliances
Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
| Package / Case | MSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 300 ppm/°C |
| Resistance | 50kOhm |
| Number of Positions | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 100μA |
| Memory Type | Non-Volatile |
| Halogen Free | Halogen Free |
| Converter Type | DIGITAL POTENTIOMETER |
| Total Resistance | 50000Ohm |
| Resistor Terminal Voltage-Max | 3V |
| Control Interface | INCREMENT/DECREMENT |
| Length | 3mm |
| Height Seated (Max) | 1.1mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C |
| Series | CAT5114 |
| Tolerance | ±20% |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | NONVOLATILE MEMORY |
| Voltage - Supply | 2.5V~6V |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | COMMERCIAL |
| Configuration | Potentiometer |
| Interface | Up/Down (U/D, INC, CS) |
| Number of Circuits | 1 |
| Taper | Linear |
| Number of Taps | 32 |
| Resistance - Wiper (Ω) (Typ) | 400 |
| Temperature Coefficient (Typ) | 300ppm/°C |
| RoHS Status | ROHS3 Compliant |
CAT5114ZI-50-G Datasheet
+8613715157867