CD74HC4046APWR OverviewAs a clock IC, it is packaged by the Cut Tape (CT) method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. Basically, this time clock generator needs a voltage of 3V. There is a Clock PLL called CMOS which is designed to be the input to this clock generator. RF synthesizers based on this clock provide frequencies up to 38MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 6V. A maximum voltage of 2V should be used for this frequency generator for safety reasons. There should be 2V~6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -55°C~125°C. As far as this electronic part is concerned, it can be classified as a Phase Lock Loop (PLL) component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number 74HC4046 are listed below. There are 16 pins that are available on the clock PLL. There is an electronic part in this series that belongs to the 74HC family. High efficiency is achieved when operating at a frequency of 18MHz. I have designed a clock PLL with 1 elements and low jitter performance. There should be a maximum supply current of 204mA for this time clock generator.
CD74HC4046APWR FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
CD74HC4046APWR ApplicationsThere are a lot of Texas Instruments
CD74HC4046APWR Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Lifecycle Status | ACTIVE (Last Updated: 8 hours ago) |
Factory Lead Time | 6 Weeks |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
Number of Pins | 16 |
Weight | 61.887009mg |
Operating Temperature | -55°C~125°C |
Packaging | Cut Tape (CT) |
Series | 74HC |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 16 |
ECCN Code | EAR99 |
Type | Phase Lock Loop (PLL) |
Voltage - Supply | 2V~6V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 3V |
Frequency | 18MHz |
Base Part Number | 74HC4046 |
Pin Count | 16 |
Number of Elements | 1 |
Supply Voltage-Max (Vsup) | 6V |
Power Supplies | 2/6V |
Supply Voltage-Min (Vsup) | 2V |
Nominal Supply Current | 8μA |
Frequency (Max) | 38MHz |
Supply Current-Max (Isup) | 204mA |
Input | CMOS |
Ratio - Input:Output | 1:4 |
PLL | Yes |
Differential - Input:Output | No/No |
Height | 1.2mm |
Length | 5mm |
Width | 4.4mm |
Thickness | 1mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |