CDC5806PWRG4 OverviewAs a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVTTL is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 74MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with LVCMOS, LVTTL logic levels. This electronic component can be classified as a PLL Clock Generator. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. According to the base part number CDC5806, its related parts can be found. There is an available 20 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible. Frequency generator is able to reali54MHze high efficiency when operating at a frequency of 54MHz. This is a 3-element clock generator with low jitter performance.
CDC5806PWRG4 FeaturesAvailable in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC5806PWRG4 ApplicationsThere are a lot of Texas Instruments
CDC5806PWRG4 Clock Generators applications.
Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
Number of Pins | 20 |
Weight | 76.997305mg |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Pbfree Code | no |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 20 |
Type | PLL Clock Generator |
Voltage - Supply | 3V~3.6V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Frequency | 54MHz |
Base Part Number | CDC5806 |
Output | LVCMOS, LVTTL |
Pin Count | 20 |
Number of Outputs | 6 |
Operating Supply Voltage | 3.3V |
Number of Elements | 3 |
Supply Voltage-Min (Vsup) | 3V |
Number of Circuits | 1 |
Nominal Supply Current | 45mA |
Frequency (Max) | 74MHz |
Input | LVCMOS, LVTTL |
Ratio - Input:Output | 1:6 |
PLL | Yes with Bypass |
Differential - Input:Output | No/No |
Divider/Multiplier | Yes/No |
Width | 4.4mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |