CDCF2510PWG4 OverviewThe package Tube contains it. In a 24-TSSOP (0.173, 4.40mm Width)-shaped case, it comes. The recommended mounting type is Surface Mount. As far as terminations are concerned, there are 24. Voltage is provided by the part at 3.3V. Running 260 utilizes this part's peak reflow temperature. On the device, there are 1. When Vsup reaches 3.6V, the maximum supply voltage is reached. normally, the supply voltage (Vsup) should remain above 3V. Variations are made in the range of operating temperature 0°C~85°C. The component can supply a voltage of 3V~3.6V. The main purpose of the component is Memory, DRAM DIMM. Searching for information about CDCF2510 starts with the base part number. Ideally, it should be mounted with Surface Mount. Devices with 24 pins are designed. A total of 24 pins are included. Voltage should be kept at 3.3V. Circuits application can maintain 10 outputs. Using frequency 140MHz, it achieves excellent efficiency.
CDCF2510PWG4 FeaturesMounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 3.3V
CDCF2510PWG4 ApplicationsThere are a lot of Texas Instruments
CDCF2510PWG4 application specific timer applications.
Wireless Access Point
Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 140MHz |
| Base Part Number | CDCF2510 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | SERIES-RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Main Purpose | Memory, DRAM DIMM |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCF2510PWG4 Datasheet
+8613715157867