CDCU877RTBR Overview
There is a Tape & Reel (TR) package that contains it. 40-VFQFN Exposed Pad is included in the case. Clock program is recommended to mount using type Surface Mount. In it, there are 40 terminations. Clock program provides 1.8V volts. In order to run 260, the peak reflow temperature of this part is taken into account. The device contains 1. The operating temperature is varied over a range of -40°C~85°C. Clock program is possible for the component to supply a voltage of 1.7V~1.9V. Its primary purpose is Memory, DDR2. Searching for information is made easier by using the CDCU877 part number as the base number. Surface Mount is recommended for mounting. With 40 pins, the device is designed. There are 40 pins on it. You should maintain a voltage of 1.8V for the supply. There is 10 problem with the device maintaining 10 outputs. You can find parts related to the 877 family based on the 877 family. A logic IC of type PLL BASED CLOCK DRIVER is used in it. At 400MHz frequency, it is highly efficient.
CDCU877RTBR Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 40 Pins
operate supply voltage at the range of 1.8V
Logic IC Type: PLL BASED CLOCK DRIVER

CDCU877RTBR Applications
There are a lot of Texas Instruments
CDCU877RTBR application specific timer applications.

Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE

Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	40-VFQFN Exposed Pad
Number of Pins	40
Weight	103.986051mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	40
Packing Method	TR
Voltage - Supply	1.7V~1.9V
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Frequency	400MHz
Base Part Number	CDCU877
Pin Count	40
Number of Outputs	10
Operating Supply Voltage	1.8V
Number of Circuits	1
Nominal Supply Current	500μA
Family	877
Output Characteristics	3-STATE
Input	SSTL-18
Ratio - Input:Output	1:10
Logic IC Type	PLL BASED CLOCK DRIVER
Max I(ol)	0.009 A
PLL	Yes
Differential - Input:Output	Yes/Yes
Main Purpose	Memory, DDR2
Same Edge Skew-Max (tskwd)	0.035 ns
Height	1mm
Length	6mm
Width	6mm
Thickness	900μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free