CDCV855IPWRG4 OverviewThe Tape & Reel (TR) method is used for packaging clock ICs. As part of the 28-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 28 terminations found in this file. To operate this time clock generator, 2.5V voltage should be applied. In this clock generator, SSTL-2 is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. 2.7V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.3V. In terms of supply voltage, RF synthesizer works with 2.3V~2.7V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. It is a 28-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CDCV855. There are 28 pins on the frequency generators that are available for use. Supply voltage 2.5V is what clock generator can handle. 4 signal outputs are provided for enhancing output frequency as much as possible. Low timing skew is offered by this RF synthesizer at maximum 0.05 ns. By searching for parts that belong to the 855 family, you can find electronic parts that are similar. Using a frequency of 180MHz allows frequency synthesizer to achieve high efficiencies. This clock generator ic is ideal for the TR package that comes with it.
CDCV855IPWRG4 FeaturesAvailable in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCV855IPWRG4 ApplicationsThere are a lot of Texas Instruments
CDCV855IPWRG4 Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | PLL Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 180MHz |
| Base Part Number | CDCV855 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Family | 855 |
| Output Characteristics | 3-STATE |
| Input | SSTL-2 |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867