CDCVF855PWR OverviewAs a clock IC, it is packaged by the Tape & Reel (TR) method. The 28-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 28 terminations. Basically, this time clock generator needs a voltage of 2.5V. There is a Clock PLL called SSTL-2 which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 2.7V. A maximum voltage of 2.3V should be used for this frequency generator for safety reasons. There should be 2.3V~2.7V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. Microprocessor-specific clock PLL with 28 bits. The related electronic parts of part number CDCVF855 are listed below. There are 28 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 2.5V as the supply voltage. The output frequency can be magnified as high as possible with the assistance of 4 signal outputs. If you search for the 855 family of parts, you will be able to find similar electrical parts. High efficiency is achieved when operating at a frequency of 220MHz. It is perfect for this clock generator ic to use the TR package.
CDCVF855PWR FeaturesAvailable in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCVF855PWR ApplicationsThere are a lot of Texas Instruments
CDCVF855PWR Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | PLL Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 220MHz |
| Base Part Number | CDCVF855 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Family | 855 |
| Output Characteristics | 3-STATE |
| Input | SSTL-2 |
| Ratio - Input:Output | 2:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 3.5 ns |
| Divider/Multiplier | No/No |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867