CENG-LH79520-10-403HC Overview
MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of ARM720T, LH79520 cores in it.It is default for the microcontroller to set the mode to 0°C~70°C.There is a flash size 16MB on the MCU electronics.In this case, the connector type is SO-DIMM-144.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 32MB.In this MCU chip, the speed is set to 77.4MHz.For as long as microprocessor continues to operate accurately at the 77.4MHz frequency, microprocessor will continue to function correctly.As of right now, 70°C is the maximum operational temperature at this time.Microprocessor should be warmer than 0°C when microprocessor is operating.In the program, there is a structure called ARM.
CENG-LH79520-10-403HC Features
Core processor of ARM720T, LH79520
Flash size of 16MB
Speed of 77.4MHz
Core architecture of ARM

CENG-LH79520-10-403HC Applications
There are a lot of Logic
CENG-LH79520-10-403HC Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Operating Temperature	0°C~70°C
Published	2003
Size / Dimension	2.37 x 2.67 60.2mmx67.8mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	SO-DIMM-144
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Frequency	77.4MHz
Speed	77.4MHz
RAM Size	32MB
Core Processor	ARM720T, LH79520
Density	122.1 Mb
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	16MB
Height	4.4mm
Length	60.2mm
Width	67.8mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead