CENGLH7A400-10-403EI Overview
A MPU Core-type board or module is used in this microcontroller.Processors with ARM922T, LH7A400 cores drive it.The microcontroller is set to -40°C~85°C by default, which is the default setting.Flash size on this MCU electronics is 16MB.Microprocessor chip is a type SO-DIMM-144 connector.The RAM size has been reduced to 64MB in order to ensure that the software runs normally.A 200MHz-speed motor drives the MCU chip.At a frequency of 200MHz, MCU chip can continue to function accurately.Microprocessor chip is currently operating at 85°C°C, which is the maximum operational temperature.The temperature should be warmer than -40°C while microprocessor is operating.The architecture it uses at micro controller's core is ARM.
CENGLH7A400-10-403EI Features
Core processor of ARM922T, LH7A400
Flash size of 16MB
Speed of 200MHz
Core architecture of ARM

CENGLH7A400-10-403EI Applications
There are a lot of Logic
CENGLH7A400-10-403EI Microcontroller, Microprocessor, FPGA Modules applications.

Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel

Operating Temperature	-40°C~85°C
Published	2004
Size / Dimension	2.37 x 2.67 60.2mmx67.8mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	SO-DIMM-144
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Frequency	200MHz
Speed	200MHz
RAM Size	64MB
Core Processor	ARM922T, LH7A400
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	16MB
Height	4.4mm
Length	60.2mm
Width	67.8mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead