CENGLH7A400-10-503HC-B Overview
A MPU Core-type board or module is used in this microcontroller.Processors with ARM922T, LH7A400 cores drive it.The microcontroller is set to 0°C~70°C by default, which is the default setting.Flash size on this MCU electronics is 16MB.Microprocessor chip is a type SO-DIMM-144 connector.The RAM size has been reduced to 64MB in order to ensure that the software runs normally.A 200MHz-speed motor drives the MCU chip.At a frequency of 200MHz, MCU chip can continue to function accurately.Microprocessor chip is currently operating at 70°C°C, which is the maximum operational temperature.The temperature should be warmer than 0°C while microprocessor is operating.The architecture it uses at micro controller's core is ARM.
CENGLH7A400-10-503HC-B Features
Core processor of ARM922T, LH7A400
Flash size of 16MB
Speed of 200MHz
Core architecture of ARM

CENGLH7A400-10-503HC-B Applications
There are a lot of Logic
CENGLH7A400-10-503HC-B Microcontroller, Microprocessor, FPGA Modules applications.

Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel

Operating Temperature	0°C~70°C
Published	2004
Size / Dimension	2.37 x 2.67 60.2mmx67.8mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	SO-DIMM-144
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Frequency	200MHz
Speed	200MHz
RAM Size	64MB
Core Processor	ARM922T, LH7A400
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	16MB
Height	4.4mm
Length	60.2mm
Width	67.8mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead