CY23EP09SXC-1HT OverviewIn order to package it as a clock IC, the Tape & Reel (TR) package is used. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 16 terminations. Clock generator ics require a voltage of 2.5V. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 200MHz 220MHz. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 2.7V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. Clock generator ic works with 2.5V 3.3V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. It is a 16-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CY23EP09. The frequency synthesizer has 16 pins that are available. In terms of the supply voltage, analog clock generator can handle 3.3V volts. This frequency synthesizer features ALSO OPERATES AT 3.3V SUPPLY to produce better clock signals. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible.
CY23EP09SXC-1HT FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23EP09SXC-1HT ApplicationsThere are a lot of Cypress Semiconductor Corp
CY23EP09SXC-1HT Clock Generators applications.
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
Test equipment
Factory Lead Time | 5 Weeks |
Contact Plating | Gold, Tin |
Mounting Type | Surface Mount |
Package / Case | 16-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 16 |
Operating Temperature | 0°C~70°C |
Packaging | Tape & Reel (TR) |
Published | 2002 |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 16 |
Type | Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
Voltage - Supply | 2.5V 3.3V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 2.5V |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | CY23EP09 |
Output | LVCMOS |
Pin Count | 16 |
Number of Outputs | 9 |
Qualification Status | Not Qualified |
Operating Supply Voltage | 3.3V |
Supply Voltage-Max (Vsup) | 2.7V |
Supply Voltage-Min (Vsup) | 2.3V |
Number of Circuits | 1 |
Nominal Supply Current | 45mA |
Frequency (Max) | 200MHz 220MHz |
Input | LVCMOS, LVTTL |
Ratio - Input:Output | 1:9 |
PLL | Yes with Bypass |
Differential - Input:Output | No/No |
Propagation Delay (tpd) | 4.4 ns |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |