CY24488ZXC OverviewAs a clock IC, it is packaged by the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called CMOS, Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 148.5MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.5V 3.3V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator, Fanout Distribution component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number CY24488 are listed below. There are 16 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The output frequency can be magnified as high as possible with the assistance of 5 signal outputs. I have designed a clock PLL with 4 elements and low jitter performance.
CY24488ZXC FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY24488ZXC ApplicationsThere are a lot of Cypress Semiconductor Corp
CY24488ZXC Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY24488 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Number of Circuits | 1 |
| Nominal Supply Current | 60mA |
| Frequency (Max) | 148.5MHz |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 1:5 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |