CY28354OXC-400T OverviewThere is a Tape & Reel (TR) package that contains it. 48-BSSOP (0.295, 7.50mm Width) is included in the case. Clock program is recommended to mount using type Surface Mount. In it, there are 48 terminations. Clock program provides 2.5V volts. The device contains 1. In normaloperation, the maximum frequency is 400MHz. A maximum supply voltage (Vsup) is reached at 2.7V. Keeping Vsup above 2.3V is necessary for normaloperation. The operating temperature is varied over a range of 0°C~85°C. Clock program is possible for the component to supply a voltage of 2.3V~2.7V. Its primary purpose is Memory, DDR. As the output, HCSL should be used. Of the part, there are 2003 publications. Searching for information is made easier by using the CY28354 part number as the base number. With 48 pins, the device is designed. There are 48 pins on it.
CY28354OXC-400T FeaturesMounting Type: Surface Mount
Include 1 Circuits
run the output at th range of HCSL
with 48 Pins
CY28354OXC-400T ApplicationsThere are a lot of Silicon Labs
CY28354OXC-400T application specific timer applications.
Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 50.008559mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | CY28354 |
| Output | HCSL |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 400MHz |
| Logic Function | Buffer |
| Input | Clock |
| Ratio - Input:Output | 2:12 |
| PLL | No |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 6 ns |
| Main Purpose | Memory, DDR |
| Same Edge Skew-Max (tskwd) | 0.075 ns |
| Height Seated (Max) | 2.794mm |
| Width | 7.5057mm |
| RoHS Status | RoHS Compliant |