CY2SSTV857ZI-27T OverviewThe Tape & Reel (TR) package provides access to it. An accompanying case is included. A mounting type of Surface Mount is recommended. There are 48 terminations in it. The part provides a voltage of 2.5V volts. 1 are present on the device. normaloperation has a maximum frequency of 200MHz. As the supply voltage (Vsup) increases, it reaches 2.63V. Clock program is important to keep the supply voltage (Vsup) above 2.38V for the device to operate normally. Temperatures can be varied in the -40°C~85°C range. Depending on the component, a voltage of 2.375V~2.625V can be supplied. This component primarily serves the purpose of Memory, DDR, SDRAM. The output should be SSTL. Currently, there are 2008 publications of the part. In order to find information about a part, you need to start at CY2SSTV857. There are 48 pins on this device. The board has 48 pins. 2.5V should be the supply voltage.
CY2SSTV857ZI-27T FeaturesMounting Type: Surface Mount
Include 1 Circuits
run the output at th range of SSTL
with 48 Pins
operate supply voltage at the range of 2.5V
CY2SSTV857ZI-27T ApplicationsThere are a lot of Silicon Labs
CY2SSTV857ZI-27T application specific timer applications.
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
Servers, Storage, Search Acceleration
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Voltage - Supply | 2.375V~2.625V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | CY2SSTV857 |
| Output | SSTL |
| Pin Count | 48 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.63V |
| Supply Voltage-Min (Vsup) | 2.38V |
| Number of Circuits | 1 |
| Nominal Supply Current | 12mA |
| Frequency (Max) | 200MHz |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 7.5 ns |
| Main Purpose | Memory, DDR, SDRAM |
| fmax-Min | 60 MHz |
| Width | 6.096mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |