CY7B9911-5JC Overview
As a clock IC, it is packaged by the Tube method. The 32-LCC (J-Lead) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 220 during reflowing. As you can see, it consists of 32 terminations. Basically, this time clock generator needs a voltage of 5V. There is a Clock PLL called TTL which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 100MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 4.5V~5.5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 32 bits. The related electronic parts of part number CY7B9911 are listed below. There are 32 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 5V as the supply voltage. There is an electronic part in this series that belongs to the RoboClock+™ family. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. If you search for the 7B family of parts, you will be able to find similar electrical parts.
CY7B9911-5JC Features
Available in the 32-LCC (J-Lead)
Supply voltage of 5V
Operating supply voltage of 5V

CY7B9911-5JC Applications
There are a lot of Cypress Semiconductor Corp
CY7B9911-5JC Clock Generators applications.

Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment

Contact Plating	Lead, Tin
Mounting Type	Surface Mount
Package / Case	32-LCC (J-Lead)
Surface Mount	YES
Number of Pins	32
Operating Temperature	0°C~70°C
Packaging	Tube
Series	RoboClock+™
Published	2007
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	32
ECCN Code	EAR99
Type	Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish	TIN LEAD
Voltage - Supply	4.5V~5.5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	220
Number of Functions	4
Supply Voltage	5V
Base Part Number	CY7B9911
Pin Count	32
Number of Outputs	8
Operating Supply Voltage	5V
Power Supplies	5V
Number of Circuits	1
Nominal Supply Current	85mA
Power Dissipation	78mW
Frequency (Max)	100MHz
Family	7B
Input	TTL
Ratio - Input:Output	1:8
Max I(ol)	0.046 A
PLL	Yes
Differential - Input:Output	No/No
Prop. Delay@Nom-Sup	0.5 ns
Propagation Delay (tpd)	0.5 ns
Divider/Multiplier	Yes/Yes
Height Seated (Max)	3.556mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead