CY7B994V-2BBXC OverviewTray-method packaging is used for clock ICs. The 100-LBGA package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 100 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVPECL, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.63V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.97V. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with LVTTL logic levels. This electronic component is usually classified as a Clock Buffer, Fanout Distribution component. The clock-generating IC is a 100-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY7B994. It is possible to connect to the frequency generators via 100 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. This clock PLL features CONFIGURABLE AS SINGLE ENDED TTL ALSO for better clock signal output. The RoboClock™ series includes this electronic part. 18 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.8 ns Max, this clock generator offers low timing skew. When searching for parts of the 7B family, similar frequency generators will be found.
CY7B994V-2BBXC FeaturesAvailable in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2BBXC ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B994V-2BBXC Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Factory Lead Time | 15 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | RoboClock™ |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Propagation Delay | 200 ps |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-2BBXC Datasheet
+8613715157867