DAC712UBG4 OverviewIn the 28-SOIC (0.295, 7.50mm Width) package, you will find it. In order to operate it, a voltage supply of 15V volts is required. Surface Mount-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. Unlike other FPGA models, this one is contained in Tube for the sake of space saving. 28 terminations are present in total. You can find related parts by using the part number DAC712, which is its base part number. In order to make it work, 28 pins have been designed. With a total of 28 pins, it is equipped with a high level of security.
DAC712UBG4 Features28-SOIC (0.295, 7.50mm Width) package
28 pin count
28 pins
DAC712UBG4 ApplicationsThere are a lot of Texas Instruments
DAC712UBG4 Digital to Analog Converters (DAC) applications.
Data Acquisition Systems
Calibration
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Max Power Dissipation | 600mW |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | DAC712 |
| Pin Count | 28 |
| Output Type | Voltage - Buffered |
| Polarity | Bipolar |
| Nominal Supply Current | 22mA |
| Number of Bits | 16 |
| Architecture | R-2R |
| Converter Type | D/A CONVERTER |
| Supply Type | Dual |
| Reference Type | Internal |
| Data Interface | Parallel |
| Differential Output | No |
| Resolution | 2 B |
| Sampling Rate | 100 ksps |
| Voltage - Supply, Analog | ±11.4V~16.5V |
| Settling Time | 10μs |
| Max Dual Supply Voltage | 16.5V |
| Power Consumption | 525mW |
| Integral Nonlinearity (INL) | 2 LSB |
| Min Dual Supply Voltage | 11.4V |
| Input Bit Code | 2'S COMPLEMENT BINARY |
| Dual Supply Voltage | 15V |
| Number of Converters | 1 |
| Conversion Rate | 100 ksps |
| INL/DNL (LSB) | ±4 (Max), ±4 (Max) |
| Negative Supply Voltage-Nom | -15V |
| Differential Nonlinearity | 2 LSB |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DAC712UBG4 Datasheet
+8613715157867