DAC7617E OverviewIn the 20-SSOP (0.209, 5.30mm Width) package, you will find it. In order to operate it, a voltage supply of 3V volts is required. Surface Mount-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. Unlike other FPGA models, this one is contained in Tube for the sake of space saving. 20 terminations are present in total. You can find related parts by using the part number DAC7617, which is its base part number. In order to make it work, 20 pins have been designed. Its flexibility is fully utili3.3Ved when operated with a supply voltage of 3.3V. There is a 3V power supply that is required to operate it. With a total of 20 pins, it is equipped with a high level of security. It can accept a maximum voltage of 3.6V volts as a supply voltage. A minimal supply voltage of 3V is required for it to operate.
DAC7617E Features20-SSOP (0.209, 5.30mm Width) package
20 pin count
20 pins
DAC7617E ApplicationsThere are a lot of Texas Instruments
DAC7617E Digital to Analog Converters (DAC) applications.
Data Acquisition Systems
Calibration
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 174.689761mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 3mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DAC7617 |
| Pin Count | 20 |
| Output Type | Voltage - Buffered |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3V |
| Interface | SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 800μA |
| Number of Bits | 12 |
| Architecture | R-2R |
| Converter Type | D/A CONVERTER |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Differential Output | No |
| Resolution | 1.5 B |
| Sampling Rate | 89 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Settling Time | 10μs |
| Power Consumption | 2.4mW |
| Integral Nonlinearity (INL) | 2 LSB |
| Input Bit Code | BINARY |
| Number of Converters | 4 |
| Conversion Rate | 89 ksps |
| INL/DNL (LSB) | ±2 (Max), ±1 (Max) |
| Analog Output Voltage-Max | 1.25V |
| Differential Nonlinearity | 1 LSB |
| Length | 7.2mm |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
DAC7617E Datasheet
+8613715157867