DAC8560IADGKR OverviewThis package is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is available for purchase. 3V volts power it. Using a Surface Mount connector, you can mount this FPGA module on the development board. An FPGA belonging to the microPOWER™ series is referred to as an FPGA. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~105°C at all times. Using the Tape & Reel (TR) layout, this FPGA model can be contained in a very small amount of space. The total number of terminations is 8. Parts related to this part can be found using its base part number DAC8560. The device is designed with 8 pins in total. It is powered by a 3/5V battery, which can be purchased separately. The device has a total of 8 pins on it. In addition, it is able to support a maximum supply voltage of 5.5V. The unit is capable of working with a minimum supply voltage of 2.7V.
DAC8560IADGKR Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
8 pins
microPOWER™ series
DAC8560IADGKR ApplicationsThere are a lot of Texas Instruments
DAC8560IADGKR Digital to Analog Converters (DAC) applications.
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | microPOWER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Max Power Dissipation | 4.7mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DAC8560 |
| Pin Count | 8 |
| Output Type | Voltage - Buffered |
| Polarity | Unipolar |
| Power Supplies | 3/5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 16 |
| Architecture | String DAC |
| Converter Type | D/A CONVERTER |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | SPI, DSP |
| Differential Output | No |
| Resolution | 2 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Settling Time | 10μs |
| Power Consumption | 2.6mW |
| Integral Nonlinearity (INL) | 12 LSB |
| Input Bit Code | BINARY |
| Number of Converters | 1 |
| Conversion Rate | 200 ksps |
| INL/DNL (LSB) | ±4, ±0.5 |
| Signal to Noise Ratio (SNR) | 88 dB |
| Input Format | SERIAL |
| Analog Output Voltage-Max | 2.5005V |
| Differential Nonlinearity | 1 LSB |
| Spurious-free dynamic range (SFDR) | 79 dB |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867