DAC8574IPWR OverviewIn the 16-TSSOP (0.173, 4.40mm Width) package, you will find it. In order to operate it, a voltage supply of 3V volts is required. Surface Mount-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~105°C when operating. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. 16 terminations are present in total. You can find related parts by using the part number DAC8574, which is its base part number. There is a 3/5V power supply that is required to operate it. With a total of 16 pins, it is equipped with a high level of security. It can accept a maximum voltage of 5.5V volts as a supply voltage. A minimal supply voltage of 2.7V is required for it to operate.
DAC8574IPWR Features16-TSSOP (0.173, 4.40mm Width) package
16 pin count
DAC8574IPWR ApplicationsThere are a lot of Texas Instruments
DAC8574IPWR Digital to Analog Converters (DAC) applications.
Data Acquisition Systems
Calibration
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | DAC8574 |
| Pin Count | 16 |
| Output Type | Voltage - Buffered |
| Polarity | Unipolar |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 950μA |
| Number of Bits | 16 |
| Architecture | String DAC |
| Converter Type | D/A CONVERTER |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | I2C |
| Differential Output | No |
| Resolution | 2 B |
| Sampling Rate | 43 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 2.7V~5.5V |
| Settling Time | 10μs |
| Power Consumption | 2.7mW |
| Linearity Error-Max (EL) | 0.0987% |
| Integral Nonlinearity (INL) | 64 LSB |
| Input Bit Code | BINARY |
| Number of Converters | 4 |
| Conversion Rate | 43 ksps |
| INL/DNL (LSB) | -, ±1 (Max) |
| Signal to Noise Ratio (SNR) | 96 dB |
| Input Format | SERIAL |
| Differential Nonlinearity | 1 LSB |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DAC8574IPWR Datasheet
+8613715157867