DC-ME-Y401-C-B Overview
A MPU Core module or board is used in the microcontroller.It has ARM926EJ-S, NS9210 cores and is driven by a processor.Microcontrollers are configured by default to -40°C~80°C.MCU chips flash size is 2MB.RJ45' stands for connector type.This MCUs belongs to the Digi Connect ME® Series of MCUs.A minimum RAM size of 8MB is set to enable the software to run normally.During operation, the MCU chip moves at 75MHz speed.75MHz frequency can still be used accurately.80°C is the maximum operational temperature at this time.As microprocessor operates, microprocessor should be warmer than -40°C.A ARM architecture underpins micro controller's core.Powered by 3.3V volts, this microcontrollers operates on DC DC power.A value of FLASH, NOR, SDRAM has been selected for data storage.
DC-ME-Y401-C-B Features
Core processor of ARM926EJ-S, NS9210
Flash size of 2MB
Speed of 75MHz
Core architecture of ARM

DC-ME-Y401-C-B Applications
There are a lot of Digi
DC-ME-Y401-C-B Microcontroller, Microprocessor, FPGA Modules applications.

Test and Measurement
Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface

Factory Lead Time	4 Weeks
Operating Temperature	-40°C~80°C
Series	Digi Connect ME®
Published	2009
Size / Dimension	1.45 x 0.75 36.7mmx19.1mm
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	RJ45
Max Operating Temperature	80°C
Min Operating Temperature	-40°C
Frequency	75MHz
Operating Supply Voltage	3.3V
Interface	Ethernet, GPIO, I2C, SPI
Speed	75MHz
RAM Size	8MB
Memory Type	FLASH, NOR, SDRAM
Core Processor	ARM926EJ-S, NS9210
Data Rate	100 Mbps
Core Architecture	ARM
Power Consumption	825mW
Module/Board Type	MPU Core
Flash Size	2MB
RoHS Status	RoHS Compliant
Lead Free	Lead Free