DS1005M-100 OverviewCost-effective packaging is achieved by using Tube. Using the 8-DIP (0.300, 7.62mm) package eliminates the need to install additional insulating hardware in the application. The supply voltage of 4.75V~5.25V ensures reliable performance. In order to mount this device, the technique of Through Hole is used. The device is capable of operating at a temperature of 0°C~70°C. As a result, it is configured with 5 taps/steps. It has been found that a number of related parts with the same base part number DS1005 are universally preferred for a variety of applications. Terminals are located at DUAL. As a result, it is equipped with 8 terminations for unique configurations. When operating, a voltage of 5V is provided. As a logic type, it uses SILICON DELAY LINE. Through Hole is mounted in the way. There is a power supply provided in 5V to ensure flexibility of operation. In the family of CMOS/TTL, this is an important active component.
DS1005M-100 FeaturesSupply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
supply type: 5V
stay resistance at CMOS/TTL
DS1005M-100 ApplicationsThere are a lot of Maxim Integrated
DS1005M-100 Delay Lines Timing ICs applications.
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions
Telecommunications
Digital Test Equipment
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1005 |
| JESD-30 Code | R-PDIP-T8 |
| Function | Nonprogrammable |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Family | CMOS/TTL |
| Output Polarity | TRUE |
| Logic IC Type | SILICON DELAY LINE |
| Number of Taps/Steps | 5 |
| Number of Independent Delays | 1 |
| Delay to 1st Tap | 20ns |
| Programmable Delay Line | NO |
| Available Total Delays | 100ns |
| Total Delay-Nom (td) | 100 ns |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1005M-100 Datasheet
+8613715157867