DS1013-25 OverviewFor cost-effectiveness, it is packaged using Tube. 14-DIP (0.300, 7.62mm) packages eliminate the need for additional insulating hardware in applications. Reliable performance is ensured by the supply voltage of 4.75V~5.25V. It is mounted using the technique of Through Hole. The device features an operating temperature of 0°C~70°C. The device is configured with 1 taps/steps. For a wide range of applications, related parts with the same base part number DS1013 are universally preferred. DUAL is the location of the terminals. For unique configurations, it is equipped with 14 terminations. When the device is operating, it is supplied with a voltage of 5V. Its logic type is SILICON DELAY LINE. The minimum supply voltage of 4.75V is acceptable for it to operate. With a maximum supply voltage of 5.25V, it is acceptable for it to operate. It is mounted in the direction of Through Hole. The compound is a key component of the CMOS family.
DS1013-25 FeaturesSupply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
stay resistance at CMOS
DS1013-25 ApplicationsThere are a lot of Maxim Integrated
DS1013-25 Delay Lines Timing ICs applications.
Delay Matching
Switch Debouncing
High Vibration, High Acceleration Environments
Portable and Battery-Powered Equipment
Clock Synchronization
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1013 |
| JESD-30 Code | R-PDIP-T14 |
| Function | Multiple, NonProgrammable |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Family | CMOS |
| Output Polarity | TRUE |
| Logic IC Type | SILICON DELAY LINE |
| Number of Taps/Steps | 1 |
| Number of Independent Delays | 3 |
| Delay to 1st Tap | 25ns |
| Programmable Delay Line | NO |
| Total Delay-Nom (td) | 25 ns |
| Length | 19.05mm |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1013-25 Datasheet
+8613715157867