DS1013-60 Overview
In order to ensure cost-effectiveness, it is packaged using Tube. With the 14-DIP (0.300, 7.62mm) package, additional insulation hardware is no longer required. A reliable performance can be achieved with the supply voltage of 4.75V~5.25V. As a mounting technique, Through Hole has been used. This device has an operating temperature of 0°C~70°C. 1 taps/steps are configured. Several parts with the same base part number DS1013 are universally preferred for a variety of applications. The device is placed at the location of the terminals at DUAL. Several terminations are provided for unique configurations, including a 14 termination. An operating voltage of 5V is applied to the device when it is in operation. It uses SILICON DELAY LINE as a logic type. A supply voltage of 4.75V is sufficient for it to operate. It is acceptable to run it at the maximum voltage of 5.25V. It is mounted in the way of Through Hole. In order to ensure flexible operation, 5V is equipped with power supplies. As part of the CMOS family, there are several active components.
DS1013-60 Features
Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
supply type: 5V
stay resistance at CMOS

DS1013-60 Applications
There are a lot of Maxim Integrated
DS1013-60 Delay Lines Timing ICs applications.

Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions
Telecommunications
Digital Test Equipment
Digital Video Projection
Signal Generators and Analyzers
Clock De-Skewing

Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1999
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Terminal Finish	Tin/Lead (Sn/Pb)
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	DS1013
JESD-30 Code	R-PDIP-T14
Function	Multiple, NonProgrammable
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.25V
Power Supplies	5V
Supply Voltage-Min (Vsup)	4.75V
Family	CMOS
Output Polarity	TRUE
Logic IC Type	SILICON DELAY LINE
Prop. Delay@Nom-Sup	60 ns
Power Supply Current-Max (ICC)	70mA
Number of Taps/Steps	1
Number of Independent Delays	3
Delay to 1st Tap	60ns
Programmable Delay Line	NO
Total Delay-Nom (td)	60 ns
Length	19.05mm
Height Seated (Max)	4.572mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead